Bucket storage provides several significant features in Humio. First, it makes cloud deployment of Humio cheaper, faster, and easier to run using ephemeral disks as primary storage. It also enables recovery from the loss of multiple Humio nodes without any data loss. New nodes can join the cluster by using just configuration, Kafka, and bucket storage. Plus, bucket storage allows you to keep more events than the local disks can hold, enabling unlimited retention.
Humio supports writing a copy of the ingested logs to Amazon S3 and Google Cloud Storage using the native file format of Humio, allowing Humio to fetch those files and search them efficiently if the local copies are lost or deleted. The ability to recover from the loss of Humio nodes, though, requires the Kafka cluster not to lose recent data. In case of simultaneous failure of Humio and Kafka, recent events may be lost.
The copies written to the bucket are considered “safe” compared to a local copy as the bucket storage provided by S3 and GCP keep multiple copies in multiple locations. A bucket has unlimited storage and can hold an unlimited number of files. This allows the Humio cluster to fetch the file from the provider in case of loss of node(s) that had the local copies. It also allows configuring Humio for infinite retention by letting Humio delete local files that are also in the bucket and fetch the data from the bucket once there is a request to search them.
Humio manages the set of files in the bucket according to the retention settings in Humio for each repository and deletes files from the bucket when they are no longer relevant according to the retention setting for each repository.
As a slight alternative, you may want to read the S3 Archiving page. It’s about how to make Humio export ingested events into S3 buckets in an open format readable by other applications, but not searchable in Humio.
Bucket storage allows you to run Humio without any persistent disks. In fact, doing so is encouraged when setting up the system this way, as persistent disks in a cloud environment require network traffic and that bandwidth is better put to use for bucket storage and for networking internally in the cluster. Note that the Kafka cluster needs to be persistent and independent from the Humio cluster. Note that it is important to tell Humio that the disks are not to be trusted using
USING_EPHEMERAL_DISKS=true in order to get Humio to not trust replicas supposedly present on other nodes in the cluster, as they may vanish in this kind of environment.
Using network attached disks in combination with bucket storage is discouraged in cloud environments. Often you end up using much more network bandwidth this way.
Compression type should be set at “high” at level 9 (as is the default in 1.7.0 and later) to ensure that the files transferred to/from the bucket get as much compression applied as possible. This reduces the storage requirement both locally and in the bucket, reduces network traffic and improves search performance when data is not present locally.
When using ephemeral disks the choice of node ID needs selecting in a controlled manner, and the strategy of storing it in the file system no longer works. See the option
ZOOKEEPER_PREFIX_FOR_NODE_UUID in the configuration page for a method of assigning unique node IDs to nodes using Zookeeper.
Combining the feature of “backup to a remote file system” and Bucket Storage is discouraged. Bucket storage replaces all functionality in the previous backup system.
Humio has the concept of a “Target bucket”, to which new files are uploaded. A node has a single target at any point in time. All buckets that have received a file at some point will get registered in “global” in the Humio cluster. This allows any node in the cluster to fetch files from all buckets that have ever been a target for any node in the cluster.
Bucket storage should be configured for the entire cluster to ensure that all segment files get uploaded. There are no settings for individual repositories, and all data gets written to a single bucket. It is okay to switch to a “fresh” bucket at any point in time, also on a subset of the nodes, or in a rolling update fashion. A node uploads to the configured target bucket. Please note that the nodes will need to be able to fetch files from the previous target buckets for as long as there are files in them that they need to fetch. Do not delete or empty the previous target buckets. Make sure not to revoke any authentication tokens required for the reading of these existing files either. When a fresh target is configured, existing files do not get re-uploaded into that. The existing copy in the previous targets is the one it trusts.
It’s possible to achieve high-availability of ingested events using this feature in combination with a Kafka installation that is not on the same file systems as the Humio segment files. With Humio set up to have multiple digest nodes for each partition, ingested events are either still in the ingest queue in Kafka, or on one of the Humio nodes designated as digest node, or in the bucket storage. Humio can resume from a combination of these after sudden and complete loss of a single Humio node.
The local data storage directory holds the segment files as they get constructed. Once a segment file is complete, it gets uploaded to the bucket. Files copied to bucket storage also stay on the local disk in most cases. See Managing local disk space on how to allow Humio to delete local files that also exist in the bucket.
Humio also uploads the global-snapshot.json files to the bucket. This allows starting a node on an empty local data dir if there is a recent snapshot in the bucket configured as target for the node. The node then fetches the snapshot from the bucket and then gets up to date on the current state by reading global events from Kafka that have the changes since the snapshot was written.
Partition assignments are still being applied to segment files when configuring bucket storage. While it is possible to run with just one node assigned on both digest and storage partition rules, it’s a choice with consequences for availability in case of node failure.
The reason is that only “complete” files get put in the bucket, not the “in-progress work”. The partition scheme is applied to decide which hosts are applicable as storage for any particular segment file. Humio does not let every node download any file from the bucket; only the ones listed on the partitions that apply to the segment.
This means that if you set up storage rules to only a single node on each partition, then a single-node failure would make most queries respond with a subset of the events while the node is down. No data would be lost, but the results would be partial until the node returns to the cluster.
If you set up digest rules to have just one node on any partition, then the failure of such a node will result in incoming events on that partition not being processed by Humio but just remaining queued in Kafka. This may eventually lead to data loss as Kafka is not set up for infinite retention by default — and doing so would likely overflow Kafka at some point.
Another consideration is that having 2 replicas in both storage and digest partition rules also makes the system resilient to cases where the bucket storage upload is unable to keep up or even fails to accept uploads at all for a while. Such a scenario is a problem if any partition has only a single node assigned, as that node may fail and there are then no other copies of the data.
For storage partition rules, two replicas are recommended to allow queries to complete without responding with a “partial results” warning in case of a single node failure.
The recommendation thus is to run with two digest replicas and two storage replicas on all partitions, for better reliability of the system.
A future version of Humio will improve this by adding the ability to handle queries without partial results in case of a single node failure, and also in the case of storage partition replicas being set to just one. We will have any node in the cluster able to fetch the segment for query in case of failure of the primary node for the segment. Digest partitions will continue to need at least two for ingest to flow, in case of a single node failure.
The copies in the bucket are encrypted by Humio using AES-256 while being uploaded to ensure that even if read access to the bucket is accidentally allowed, an attacker is not able to read any events or other information from the data in the files. The encryption key is based on the seed key string set in the configuration, and each file gets encrypted using a unique key derived from that seed. The seed key is stored in global along with all the other information required to read and decrypt the files in that bucket. Humio handles changes to the encryption seed key by keeping track of which files were encrypted using what secret.
Humio computes a checksum of the local file (after encryption) while uploading and this checksum must match that computed by the receiver for the upload to complete successfully. This ensures that the bucket does not hold invalid or incomplete copies of the segment files.
Humio can manage which segment files to keep on the local file system based on the amount of disk space used, and delete local files that also exist in bucket storage. This allows you to keep more data files than the local disk has room for, essentially allowing for infinite storage of events, at the cost of paying for S3 storage and (potentially) transfer costs when the files required for a search are not present on any node.
A copy in a bucket counts as a “safe replica” that allows the cluster to delete all local copies of the file and still report it as “perfectly replicated” from a cluster management perspective.
Humio keeps track of which segment files are read by searches. When the disk is filled more than the desired percentage, Humio will delete the least recently used segment files to free up disk space. Only files that have been copied to a bucket are ever removed.
If a file is not present locally and a search needs to read it, the search runs on all the parts that are present locally and schedules a download of the missing segment files from the bucket in the background. Once the required files arrive, they get searched as if they had been there from the start. The files get downloaded by (one of) the hosts that is assigned to the storage partition for the file at the time of the search starts.
Files downloaded from the bucket to satisfy a search are kept in the secondary data dir if configured, or the primary data dir if no secondary is set. The downloaded segment files are treated like the recently created segment files, and are subject to the same rules regarding deleting them again when they become the least recently accessed file at some point.
Since Humio can search the data at a much faster pace than the network and bucket storage provider can deliver them, the performance of searches that need files from the bucket provider will be orders of magnitude slower than searches that only access local files (on fast drives.) The good use case for over-committing the file system like this is to lower the cost of hosting Humio trading in performance of searches in old events that happen to not be on the local disk.
The local file system needs to have room for at least accommodate all the mini segments and the most recent merged segments. Providing more local disk space allows Humio to keep more files in the cache, resulting in better search performance.
Hash filter files are also stored in the bucket and also get downloaded when a search requires the segment file.
# Percentage of disk full that Humio aims to keep the disk at. # Segment files will be deleted in a least recently used order, in order to hit the configured fill target. LOCAL_STORAGE_PERCENTAGE=80 # Minimum number of days to keep a fresh segment file before allowing # it to get deleted locally after upload to a bucket. # Setting such a lower bound can help ensure that recent files are kept on disk, # even if they would otherwise be evicted due to queries on older data. # Mini segment files are kept in any case until their merge result also exists. # (The age is determined using the timestamp of the most recent event in the file) # Make sure to leave most of the free space as room for the system to # manage as a mix of recent and old files. # Note! Min age takes precedence over the fill percentage, so increasing this # implies the risk of overflowing the local file system! LOCAL_STORAGE_MIN_AGE_DAYS=0
Note: This is a feature for advanced users, requiring multiple independent Kafka clusters and buckets with careful management of these in order to not mix up targets.
Since version 1.21, Humio supports a disaster recovery method based on bucket storage. The objects stored in the target bucket of a cluster can form the basis for bootstrapping a fully independent cluster. The new cluster needs to have a bucket of its own to store objects in, and will consider the “source” bucket as read only. It relies on the source bucket being immutable from the point the disaster recovery process starts - don’t point to the bucket of another running Humio cluster.
All example configs use
S3_ as prefix, use
Common use cases for disaster recovery using this method include:
In all cases these are the steps that need to happen:
A single node in the target cluster must be started with an empty data dir
global-data-snapshot.json. The recovery procedure only happens when there is no other snapshot to start from.
S3_RECOVER_FROM_*set for all the bucket storage target parameters otherwise named
S3_STORAGE_*so that those refer to the bucket that it should start based on.
S3_RECOVER_FROM_REPLACE_BUCKETset to strings that are on the form
substring/substitution. These allow you to make Humio edit certain bucket settings in the global snapshot it loads from the source bucket, before it starts fetching other data. This way you can e.g. load a snapshot originally configured for region “us-west” in the source cluster, but have the target cluster read from a bucket copy in region “us-east”.
INGEST_QUEUE_INITIAL_PARTITIONSwhich will re-hash all datasources internally to the new number of partitions. This allows you to have different Kafka ingest partition counts in the source and target clusters.
The single new node starts by fetching the latest global snapshot file from the
S3_RECOVER_FROM_BUCKET and then rewrites that taking the following steps:
At this point you can access and inspect the new cluster using the single node if you want. Once you are satisfied that the cluster looks good, it is a good idea to remove the
S3_RECOVER_FROM_* settings from the node.
Extend the cluster to the number of nodes you desire just as if this was any other Humio cluster. The new nodes should not use the special recovery configuration.
The Humio nodes will start fetching segment files from the “old” bucket and upload them to the new target, which will over time make the cluster have an independent copy of the full contents of the old bucket. Once this replication process completes, the new cluster no longer depends on any objects in the source bucket it was bootstrapped from, nor from other buckets that were referred in the snapshot fetched from that bucket.
In order for the recovery procedure to be lossless, the target cluster needs to get a global snapshot from the source cluster that does not reference segment files missing from the bucket. To create such a snapshot, the source cluster needs to be shut down gracefully before initiating the recovery procedure. This is typically not the case for an actual disaster recovery scenario, in which some data loss may be unavoidable, but for the “migrate” or “clone” cases it is doable. If the source cluster did not shut down gracefully, then there may be reports of missing segment files in the new target cluster. These can be resolved using the Missing Segments
Humio provides a utility function to decrypt a file outside of Humio that has been uploaded to the bucket by Humio. This may come in handy as part of an audit process or as part of other processes that involve fetching files directly from the bucket. Usage:
java -cp humio.jar com.humio.main.DecryptAESBucketStorageFile <secret string> <encrypted file> <decrypted file>
Provide the path / filename of the input file to decrypt as argument. Note that the last part of the file name (the “actual file name”) is included in the decryption process, so file names must be preserved identical to those in the bucket for the path after the last
/. The “secret string” argument is the value of
GCP_STORAGE_ENCRYPTION_KEY that was in the Humio config at the time the file was uploaded by Humio.